加快vray for su渲染的插件

昨日在vray的官方论坛上寻找解决，vray for su7 渲染不兼容su平滑效果的解决办法，发现了这个插件，自己本身没有使用过，只知道一直一来vray for su 点击渲染后有时候要有很长的等待时间，才开始真正进入渲染阶段，而同样在vray for rhino 里面，都是不需要任何等待的，有人发现这是因为vray进行su的渲染前要对材质进行内部处理，有时候很花时间(以前一个40M不到的文件花了20多分钟，都以为死机了)因此他做了这个插件，此插件虽然名字里面有remove，但不会删减任何材质，也不会改变材质坐标等，只是将材质重新连接到个组件或群组，理论上只会干扰到下次给同一物体换材质。
由于最近也没有做什么复杂的设计，所以自己没有先尝试就先发过来跟大家分享了。
到现在为止此插件还没有任何bug历史，大家发现任何问题请在此贴留言。

综合看了一下回帖，觉得有明显提速的回答只占总数的一半。

另外大家知道解决vray渲染su7平滑面轮廓超明显的问题请告知。
谢谢。

本贴附件下载

Remove_CG_mat.rar

883 Bytes , 吧币: 200 , 请登陆后再进行下载！

立即下载

这个东西貌似还是很不错的，拿回去试试，研究一下，吃个螃蟹什么的，哈哈。

我也顶一下.....看看是不是真的那么神奇.

怎么用的啊,,,怎么装的.

听起来很动人，麻烦有时间的朋友测试一下次插件是否有效。
如果是，这对VFS实际应用的意义将是重大的。

留贴，期待~~
VFS的渲染前期等待确实有点让人难受~

楼主能把原始地址发来看看嘛？

原文
Title: Ruby Script for ALL VfSU users- Reduces Render Time
Post by: Jackson on November 28, 2008, 02:11:22 PM
Matthieu Noblet has very kindly spent many hours developing a free SU ruby script which will strip all materials assigned to groups and components and apply them instead directly to the geometry, which makes parsing SU files easier (and therefore much quicker) and more reliable for VfSU. After running this ruby script in SU some of my parse times dropped from as much as 20 minutes to less than 1 minute. The script will fix a smallish model (a villa, 100+ components, maybe 20 materials) in just a few seconds and a huge model (4sq kilometres of city, thousands of components, 50+ materials) in less than an hour (it's a one time fix for existing geometry and materials, so it's worth it for big models).

If any of you are not familiar with using SU ruby scripts, just download it and save it to the "Plugins" folder in your Google SketchUp program files. The next time you open SU it will be accessible under the "Plugins" menu under the name "Remove C-G Materials".

Four things to note:

Firstly, it DOES NOT DELETE any of your materials, it just reassigns them from the outside of groups and components to any geometry within that was assigned the default SU material. As such you won't actually see any difference in your model after running it, all UV mapping should be exactly as it was before.

Secondly, because of the very nature of the script you will no longer be able to apply materials to default elements of groups or multiple groups and components just by applying a material to them. It's a shame to lose this useful feature of SU modelling, but if you use VfSU often it's a very worthwhile sacrifice to make for a huge increase in speed and reliability.

Thirdly, it doesn't perform miracles- if your skp file is huge, with lots of materials and thousands of groups VfSU is still going to take quite a while to parse SU. What this ruby script really helps with is VfSU taking a long time just to parse even relatively small files.

Finally, as with all ruby scripts, this is not created, endorsed or tested by Google or ASGvis in any way and therefore you use at your own risk. Although many many users have been using it for months and have reported no problems or bugs, you run it at your own risk. If you're paranoid, "save as" your skp file before running it!

The ruby script can be downloaded here (http://rapidshare.com/files/216825604/Remove_CG_mat.rb//url).

If you'd like to say thanks to Matthieu for this very generous contribution to the VfSU community (he doesn't even use VfSU, which makes his generosity all the more remarkable) post here (http://www.sketchucation.com/for ... t&sd=a//url), he's a good guy and deserves some thanks!

Jackson

感谢楼主的共享！

有现实意义，持续关注

vary for su7跟6差别大吗？

kankan

谢了

感謝

怎么用啊？放在哪？

安上了，没有加快速度呢！

关注楼主的帖子，希望有人能试验。

渲染前需要点击。。。。。。。。。。。。。。。。。。。。。。。。

感谢楼主，下下来试试

裝完了  也顯示rome xx個材質

但似乎沒有變快   :'-(

不知是否漏了什麼步驟!