随机画家 插件！

:D上菜：【运行在SU 7.0版本】
插件： 桌面.rar (4.09 KB, 下载次数: 456)

2009-5-15 15:45 上传

点击文件名下载附件
rar

运行载体：（下载地址用网页打开）
http://sourceforge.net/project/downloading.php?group_id=240585&filename=wxSU-0-3-0-mswin.exe&a=45374274（安装版）
http://sourceforge.net/project/downloading.php?group_id=240585&filename=wxSU-0-3-0.zip&a=53953606（复制版）
实例贴图：
High_rise_textures.zip (165.67 KB, 下载次数: 867)

2009-4-16 20:38 上传

点击文件名下载附件
zip

实例模型：
High_rises_random_paint.zip (414.18 KB, 下载次数: 905)

2009-4-16 20:38 上传

点击文件名下载附件
zip

本贴附件下载

附件可能为分卷压缩包，需全部下载并放置于同一个文件夹内才可以解压哦~

High_rise_textures.zip

165.67 KB , 吧币: 200 , 请登陆后再进行下载！

立即下载

High_rises_random_paint.zip

414.18 KB , 吧币: 200 , 请登陆后再进行下载！

立即下载

桌面.rar

4.09 KB , 吧币: 200 , 请登陆后再进行下载！

立即下载

这是谁写的插件啊！正要用的，谢谢楼主了！

原帖由 刘企 于 2009-4-16 20:40:00 发表
这是谁写的插件啊！正要用的，谢谢楼主了！

:Z谢我就加分哈！

原帖由 刘企 于 2009-4-16 20:40:00 发表
这是谁写的插件啊！正要用的，谢谢楼主了！

:D:D
汗！！！你这家伙，忘了给我上菜啦！

原帖由 刘企 于 2009-4-16 20:40:00 发表
这是谁写的插件啊！正要用的，谢谢楼主了！

:D:D
汗！！！你这家伙，忘了给我上菜啦！

:D大概步骤，很简单，自己看吧！
1、First, I made a 1Km x 1Km square, and divided it with SCF Toolbar'sGreeble several times. Then I Protruded it 100m with offset 4-12m.

2、I copied the upper faces and deleted the rest. Then I divided thosefaces even more and again, protruded them 100m with offset 1-3m, againkept only the upper faces and procedded to "random paint" them withGreen values from 10 through 110. Why Green? Because that's my favoritecolor.
    values: Green 10, Green 20, Green 30, etc., and in the second example Red 20, Red 40, Red 80.

3、I then proceeded to replace those colors with the 11 high-rise texturesI had downloaded from cgtextures.com (I had resized them to 12 pixelsheight (EDIT: 120 pixels) to keep the file manageable). I just used thepaint bucket + Shift. I am attaching that material library as a zipfile so anyone can use it.

4、I then made three concentric groups of those faces. To make the groups,I changed to a Top view, rotated 45 degrees and used right-to-leftmarquee and Right click > select > all connected. For the outerring, I used random push-pull 45/9m. I also re-pasted the faces fromthe first step and pushed them 20cm to act as sidewalks.

5、The middle ring was random pushed/pulled 90/18m, and after this graphic, the inner group was random PP 180/36m.

6、I then changed to Parallel projection > side view and carefullyselected all the roof faces with a left-to-right marquee. After that, I"random painted" them with Red values 20, 40 and 80.

7、Finally, I replaced those red colors with roof textures. I thenre-built the 1Km x 1Km square again to represent the streets. That'sit! Greeble City made possible thanks to your "Random Painter"!

详细点咧.

留一个备用！！谢！

一定要顶啊

:'-(下载这么多没人顶，下次要设置权限才好！

好东西一定要顶！！  下了，但是不知道怎么用！

謝謝分享，先送上寶石，再來慢慢研究

先顶再下，谢谢分享！！！

很好，很强大

先顶再下，辛苦楼主。。。。

怎么个用法啊。。。

原帖由 Monster_Xu 于 2009-4-17 9:42:00 发表
怎么个用法啊。。。

:D多尝试就会了！另外楼上有英文操作步骤，很简单！

做人要厚道！！顶一个！:Z

40美元！~~~要顶顶

一定要顶啊 :D