|
|
Google SketchUp 7 - Maintenance 1 点击此处中文翻译
Released 2/25/2009The following issues have been fixed:
Crashes:
- Crash when auto-folding a face with holes. When auto-folding a face(either by using Move tool or the Scale tool) that contained severalholes , SketchUp could crash. This crash has been fixed.
- Crash when saving and printing with some ATI cards. Some PC userswith ATI graphics cards could consistently crash when saving models andwhen printing. This crash would occur only when "Use hardwareacceleration" in Preferences > OpenGL was checked. This crash hasbeen fixed.
- Crash with Push Pull when undoing actions and typing values in theVCB. When using the Push Pull tool, undoing certain actions and thentyping data to change the Push Pull distance, SketchUp could crash.This crash has been fixed.
- Crash on launch when 'My Documents' is unavailable. SketchUp couldcrash on launch on PC systems where "My Documents" was set in a waythat is was no longer available. SketchUp now handles this conditionand no longer crashes. Users may, however, notice that SketchUp (aswell as other applications on their computer) may be slow to do fileoperations in this case. Making 'My Documents' available fixes thisslowdown.
- Crash when creating an array with an endpoint inference. When usingthe Move tool to make copies by typing values in the Measurements box,SketchUp could crash if the Move tool was inferring an endpoint priorto the copy action. This crash has now been fixed.
- Crash when starting up SketchUp on some machines. Previously, invery limited cases, SketchUp could crash on launch when showing thelicensing dialog or the Welcome dialog. Though we could never recreatethis issue internally, we have added additional checks that we believeshould fix this issue.
- Crash when performing actions in models with very large textures onsome machines. When opening models with extremely large textures orwhen working on those models, SketchUp could crash on some machines. Wehave added checks which should prevent this crash.
- Crash when opening the Layers dialog in models with corrupt layers.Previously, on the Mac, SketchUp could crash when opening models withcorrupted layers with the Layers dialog open . SketchUp now handlesthis data without crashing.
- In models that contain component instances within other instancesnot placed in the model, projecting textures could cause SketchUp tocrash with certain geometry. This crash has been fixed.
Dynamic Components:
- Dynamic Component can become unusable when entering an invalidformula. If a Dynamic Component formula was entered with a missingquote, it was possible to create a Dynamic Component that no longerworked. This issue has been fixed.
- Dynamic Components can lose their smartness when SketchUp islaunched from the system dock. When double clicking on the SketchUpapplication in the Mac OS's system dock, Dynamic Components could failto display dynamic behavior. This issue has been fixed.
- Invalid error when editing a custom attribute in this case. Whenediting a custom Dynamic Component attribute and then pressing the Tabkey, it was possible to see an error that made no sense. SketchUp nolonger issues an error in this case.
- Page not found error when using File > Generate report on somelocalized systems. The Generate Report functionality (File >Generate Report) could show a "page not found" error on non-Englishsystems. This functionality should now be supported with all locales.
Exporters:
- Stand alone edges are no longer exported to KMZ. Model edges werepreviously not exported to the kmz exporter and Google Earth. Theexporter has been revised to export edges again.
- Textures uploaded to the 3dwh are downsampled in Google Earth.Models uploaded to the 3dwh (vs placed in Google Earth directly fromSketchUp) could show downsampled textures when viewed in Google Earth.Textures should now appear as expected.
- On the Mac, the export to DWG could fail when exporting to a folderwith foreign characters or to a name with foreign characters. The DWGexporter should now produce a valid DWG in these cases.
- Models placed in Google Earth can be incorrectly rotated. Somemodels, when placed in Google Earth, could be slightly incorrectlyrotated. This issue, which has been around for many releases, wasaddressed in this release. To fix the issue, when taking a snapshot,SketchUp now sets the North angle in Model Info > Location to pointto geographic north which is then respected by the Google Earthexporter. As part of these changes, you can no longer set the Northangle to be different per each scene as this functionality was also abug (i.e. one location should not have two different North anglesettings).
- 5x5 textures are not exported accurately. When exporting 5 x 5textures to 3ds, SketchUp could export only a subset of the texture.This issue has been fixed.
- Materials without textures can have incorrect UVs when exported toCollada. When exporting materials without textures to the Collada DAEexporter, materials could have coordinates that were invalid. Thisissue has been fixed.
Content:
- We received feedback that the new standard CAD style we shippedwith the SketchUp 7 release was not as good as our SketchUp 6 CADstyle. There were also some grammatical errors with some of the styles.We updated our style libraries to address these issues.
- Previously, some of SketchUp's materials (e.g. chainlink andconstruction fencing materials), had gray halos around the clear alphaportions of the image. These materials have been modified to attempt toimprove their visibility, especially from a distance.
Other:
- Measurements box text can be incorrect when switching tools. Whenswitching between tools, the Measurements box could show text from theprevious tool. The Measurements box should now show correct text whenswitching between tools.
- The status bar no longer updates on the Mac. When performingactions on the Mac that show progress in the status bar (e.g. Sandboxactions), the status bar did not update. The status bar should now showprogress for lengthy tool actions.
- Strange error message when launching SketchUp after saving atemplate in this case. If autosave kicked off prior to saving a newtemplate using the Save as Template feature, SketchUp could issue anerror message the first time it was relaunched. This error messageshould no longer occur.
- SketchUp not properly licensed on Vista when running as anon-administrator. On Vista, if a user executed SketchUp as a nonadministrator and then licensed the product, SketchUp would not beproperly licensed. Running as an administrator is no longer necessaryfor licensing to work.
- Incorrect error message when entering a prior version license. Whenentering a pre-SketchUp 7 license in the SketchUp 7 license dialog, anerror message was issued that didn't make sense. This issue has beenfixed.
- 'Page not found' error when viewing Help menu items with nonEnglish locales. Previously, choosing the 'Help Center' or 'Welcome toSketchUp' choices from the Help menu could show a 'page not found'error on non-English systems. This functionality should now besupported with all locales.
- Invalid login page when signing out of the 3D Warehouse using thesesteps. When editing models on the 3D Warehouse and then signing out of3dwh via the "G" button on the status bar, it was possible to end up ata login page that didn't work. In this case, SketchUp now returns theuser to the 3dwh home page.
- Inability to sign into the 3dwh from within SketchUp on some MacEuropean systems. On Mac systems, some European users were previouslynot able to sign into the 3dwh from within SketchUp but could sign intothe 3dwh from outside of SketchUp. We changed the code and believe wehave fixed this issue.
The following functionality has been added.
- It is now possible to add a model to Google Earth relative to the ocean floor. To use this functionality, go to Preferences > Extensions and check the Google Earth Ocean Modelingextension. Then, open Google Earth 5, navigate to somewhere under thesea, relatively close to the ocean floor. In SketchUp, choose to get aCurrent View (Tools > Google Earth > Get Current View). Create your model and then select Plugins > Model on Ocean Floor. Then place your model in Google Earth to see your model placed relative to the ocean floor vs the ocean surface.
- A get_glued method has been added to the Ruby Face class.
LayOut:
The following issues have been fixed:
- Crash when updating a SketchUp model reference - On Windows, if yousaved a large multi-scene model in SketchUp and were attempting toupdate that change in LayOut, LayOut could crash. We believe this crashhas been fixed.
- Crash when opening a file or editing text when the file was createdon another machine - If a document contained fonts that weren'tinstalled on your computer, LayOut would attempt to substitute thosefonts with another font. If your computer didn't have that second setof fonts (that LayOut was attempting to substitute), LayOut couldcrash. This crash has been fixed.
- Crash when label's leader was collapsed on itself - Previously,LayOut could crash if you moved one endpoint of a label's leader lineso that it was coincident with its other endpoint. This crash has beenfixed.
- Crash when clicking on a corrupt page - If you attempted to changepages in a corrupt file, LayOut would crash. LayOut now recognizesthese files as invalid and will not open them.
- Windows Crash when clicking on a dialog box name - If your dialogbox names had become corrupt, LayOut could crash when clicking on thedialog box name. This has been fixed.
- Crash when selecting a scrapbook - If you deleted or moved ascrapbook file from its Windows directory while LayOut was open, andthen attempted to select that scrapbook from the Scrapbook panel'sdrop-down list, LayOut could crash. This crash has been fixed.
- Exported PDFs now have the 'scale to fit printable margins' settingturned off by default - In the original release of LayOut 2, PDFs thatwere exported from LayOut and printed from Acrobat may have had the'scale to printable margins' setting turned on. This would cause PDFsprinted from Acrobat to print slightly off scale. The default has beenchanged: the 'scale to fit printable margins' setting in Acrobat isturned off.
- Text with custom line spacing failed to export to PDF - If a blockof text used a custom line spacing (such as 18 pts), that text wouldnot export to PDF. This issue has been fixed; the text now exports.
- Unexpected Spaces switch - On Macs running OSX 10.5 (Leopard), youcould unexpectedly switch 'Spaces' if you launched LayOut in one Space,moved LayOut to a second Space, and then hovered over an inferencepoint in your '.layout' document. This issue has been fixed.
- Windows leak with Context menus - There was a small memory leakwhen right-clicking on an object to view a context menu. This has beenfixed.
- SketchUp Model panel resized - On the Mac, it was possible toresize the SketchUp Model panel so the fog and shadow controls werehidden. The minimum vertical size of this panel has been changed sothat the fog + shadow controls are always visible.
- We've made a few changes to some of the default Templates + Scrapbooks:
Arrows scrapbook:
- The SketchUp arrows are now raster-rendered. Previously, they were vector-rendered.
- The labels are now on locked layers, so they can't be copied into your doc from the scrapbook page.
- The 'Preserve Scale on Resize' setting for the SketchUp arrows isnow turned off. Previously, when you copied in an arrow and attemptedto scale it, the arrow itself did not scale; it was cropped instead.Now the arrow will scale.
Titleblock > Contemporary > Arch D Landscape template:
- The 'Cover Page' layer had hidden entities on the 'Inside Page.' These extraneous entities have been deleted.
Paper > Plain Paper > Letter Portrait + Tabloid Portrait templates:
- The active layer was changed to 'Default.' Previously, the shared 'On Every Inside Page' layer was the active layer.
Paper > Graph Paper > A3 Landscape, A4 Landscape, and A4 Portrait templates:
- The 'User Content' layer name was changed to 'Default.' The layer names of these templates are now consistent with the others.
Warning: If you've made changes to the defaultscrapbooks or templates that shipped with LayOut 2 (without renamingthe files), those changes will be overwritten when you upgrade toMaintenance Release 1. To save your changes, follow the below stepsbefore you upgrade:
Windows
To save changes made to the default Templates:
- Navigate to 'C:\Documents and Settings\All Users\Application Data\Google\Google SketchUp 7\LayOut\Templates.'
- Find the template files you want to save, and copy them to'C:\Documents and Settings\~your user name\ApplicationData\Google\Google SketchUp 7\LayOut\Templates.' The templates will nowappear in your 'My Templates' folder in the Getting Started dialog.Alternatively, you can rename the template files you want to save. Theupgrade will not overwrite the default files if their names have beenchanged.
To save changes made to the default Scrapbooks:
- Navigate to 'C:\Documents and Settings\All Users\Application Data\Google\Google SketchUp 7\LayOut\Scrapbooks.'
- Find the scrapbook files you want to save, and copy them to'C:\Documents and Settings\~your user name\ApplicationData\Google\Google SketchUp 7\LayOut\Scrapbooks.' Alternatively, youcan rename the scrapbook files you want to save. The upgrade will notoverwrite the default files if their names have been changed.
Mac
To save changes made to the default Templates:
- Navigate to 'Hard Drive\Library\Application Support\Google SketchUp 7\LayOut\Templates.'
- Find the template files you want to save, and copy them to '~username\Library\Application Support\Google SketchUp 7\LayOut\Templates.'The templates will now appear in your 'My Templates' folder in theGetting Started dialog. Alternatively, you can rename the templatefiles you want to save. The upgrade will not overwrite the defaultfiles if their names have been changed.
To save changes made to the default Scrapbooks:
- Navigate to 'Hard Drive\Library\Application Support\Google SketchUp 7\LayOut\Scrapbooks.'
- Find the scrapbook files you want to save, and copy them to '~username\Library\Application Support\Google SketchUp 7\LayOut\Scrapbooks.'Alternatively, you can rename the scrapbook files you want to save. Theupgrade will not overwrite the default files if their names have beenchanged.
updated2/25/2009 |
|
/2 
