SketchUp吧

标题: 原創 - Skatter For Sketchup 下载 + 破解方法 [打印本页]

作者: Saputra    时间: 2016-10-11 23:58
标题: 原創 - Skatter For Sketchup 下载 + 破解方法
本帖最后由 Saputra 于 2016-10-12 00:58 编辑

原創 - Skatter For Sketchup 下载 + 破解方法
-
-
There are
two main way for the trial countdown, 1. Online server, 2. Program Date.有兩種主要方式的試用倒計時,1.在線服務器,2.程序日期。
-
My method is deal to the Program Date. No crack file is required, mean no risk for the virus attack.
我的方法是處理程序日期。 不需要破解文件,意味著沒有病毒攻擊的風險。

-
For Skatter, we will use the program called "RunAsDate v1.31" to freeze the trial time as it start.

對於Skatter,我們將使用名為“RunAsDate v1.31”的程序在開始時凍結試用時間。

-
By this way, we can use the plugin for unlimited long. As long as you keep freezing the trial time.
通過這個方法,我們可以
無限長地使用插件。 只要你繼續凍結試用時間。
-
------

-
IMPORTANT: Only use the shortcut which created by the RunAsDate. Or else, the trial will be finish immediately.

-
重要:僅使用由RunAsDate創建的快捷方式。 否則,試用將立即結束。
-

------
-
Skatter for Sketchup 下载方法:
-
-
(, 下载次数: 13)
-
1. Go to https://www.skatterforsketchup.com/ . Click the "Download free trial / Demo".
1. 進入 https://www.skatterforsketchup.com/ 點擊 "Download free trial / Demo"

-
-
(, 下载次数: 9)
-
2. Roll down to this column.
2. 向下滾動直到此列。

-
-
(, 下载次数: 13)
-
3. Click the "Download free trial / Demo".
3. 點擊 "Download free trial / Demo"

-
-
(, 下载次数: 15)
-
4. Put number "0" (Zero) in the box called "Name a fair price". Then click "I want this !".
4.在 "Name a fair price" 框中輸入數字“0”(零)。 然後點擊 "I want this !"

-
-
(, 下载次数: 11)
-
5. Fill the personal information. Then click "Get".
5.填寫個人信息。 然後點擊 "Get"

-
-
(, 下载次数: 12)
-
6. After, check your mail box. You will got such email. Click "View product".
6. 之後,檢查您的郵箱。 你會收到這樣的電子郵件。 點擊 "View product"

-
-
(, 下载次数: 11)
-
7. Download the version according to your PC.
7. 根據您的PC下載版本。
-

-
Done.
完成。
-
------
-
RunAsDate 下载方法:
-
-
(, 下载次数: 16)
-
1. Go to http://www.nirsoft.net/utils/run_as_date.html and roll down.
1. 進入 http://www.nirsoft.net/utils/run_as_date.html 並向下滾動。
-

-
(, 下载次数: 8)
-
2. Choose the version and Download.
2. 選擇版本和下載。
-

-
Done.
完成。
-
------
-
RunAsDate 破解使用方法:
-
-
(, 下载次数: 9)
-
1. Open the program.
1. 打開程序。

-
-
(, 下载次数: 25)
-
2. The windows should pop-up.
2. 窗口應該彈出。

-
2.1 Choose the Sketchup.exe intall location. Example: "C:\Program Files\SketchUp\SketchUp 2016\SketchUp.exe".

2.1 選擇Sketchup.exe安裝位置。 例子:"C:\Program Files\SketchUp\SketchUp 2016\SketchUp.exe"

-
2.2 Enable the box. That make the trial freeze everytime you open the sketchup.
2.2 啟用此框。 這使每次打開Sketchup凍結試用時間。
-
2.3 Enter the name for the shortcut, then click " Create Desktop Shortcut =>".

2.3 輸入快捷方式的名稱,然後單擊 " Create Desktop Shortcut =>"

-
-
(, 下载次数: 15)

-
3. After you created a shortcut. Open Sketchup with this ONLY.
3.創建桌面快捷方式後。 使用此選項打開Sketchup。

-
-
(, 下载次数: 12)
-
4. Go to the "Extensions > Skatter > Skatter" to open the for Skatter for Sketchup.
4. 轉到 "Extensions > Skatter > Skatter" 以打開Skatter for Sketchup。

-
-
(, 下载次数: 15)
-
5. Go to the options.
5. 進入選項。

-
-
(, 下载次数: 17)
-
6. Enter your e-mail to Activat. ** My one is already activated. So, there are not the same as here.**
6. 輸入您的電子郵件以激活。 **我的已經激活。 所以,這裡不一樣。**
-

-
Done.

完成。
-
------
-
Skatter for Sketchup 破解驗證:
-
-
(, 下载次数: 14)
-
1. As we see 15 days trial since Activate.
1. 正如我們看到,15天試用。

-
-
(, 下载次数: 15)

-
2. The email is sent at October 9, 2016.
2.電子郵件於2016年10月9日發送。

-
-
(, 下载次数: 12)
-
3. Today is October 11, 2016. The trial time should be 16 - 2 = 14 days.
3. 今天是2016年10月11日。試用時間應為16 - 2 = 14天。
-

-
(, 下载次数: 13)
-
4. Look here, it keep the trial days as 16 days. No change.
4. 看這裡,試用天保持為16天。 沒有變化。

-
-
Success.
成功。
-
------
-
Here you go. Enjoy.

幹得好。 請享用。
-
------
-
Please kindly to support.

請衷心支持。
-
------

-
Sorry for my poor Chinese.
因為我
差勁的中文
寫作對不起
-
------
-
Copyright to Chan, Teck Fai Saputra. ( Me )
-

------


作者: Epimetheus    时间: 2016-10-17 11:44
thank you for your sharing
作者: Saputra    时间: 2016-10-18 02:11
Epimetheus 发表于 2016-10-17 11:44
thank you for your sharing

Feel free to ask if there is any problem.

作者: gfhfghdfdh    时间: 2016-10-19 11:36
thanks。。。。。。
作者: 苹果里的狼    时间: 2016-10-20 11:14
你好,感谢提供的这篇教程。但是,由于我提前安装试用过,现在,已经不能用这个办法了,有什么方法可以绕过15天的试用期么?非常感谢。
作者: Saputra    时间: 2016-10-20 23:11
蘋果里的狼 發表於 2016-10-20 11:14
你好,感謝提供的這篇教程。但是,由於我提前安裝試用過,現在,已經不能用這個辦法了,有什麼方法可以繞過 ...

Since the Activation is through the "email-server registration system" to detect the trial time.
-
Changing the system time or regedit is not working in this case.
-
Plus, Cracking the sever is a illgel act.
-
Therefore, here is the best solution for you.
------------
Is your Skatter still installed in the Sketchup plugin? Yes ->a , No->b
-
a- Is it activated but showing "Demo is over" ? Yes ->c , No ->d
-
b- Re-installed Skatter and activated with an new email. Then use the "RunAsDate" to stop the trial.
-

c- Deactivate the licence. Then activate with an new email. Then use the "RunAsDate" to stop the trial.
-
d - Activate with an new email. Then use the "RunAsDate" to stop the trial.
-

That's mean, the only thing you can do is -> **Create a new Demo account**
------------

Be careful this time.
-
Remember ONLY use the shortcut which created by "RunAsDate" to open sketchup. Or else the demo time will run out normally.


作者: 苹果里的狼    时间: 2016-11-4 10:10
你好,非常感谢你的回复,让我知道如何去做。
你提供的这个方法的确可以冷冻试用时间,但是,,,重启后,skatter不会出现红色的代理框,相当于软件失灵,尽管试用时间没有减少。
非常希望探讨与你,非常开心。谢谢。
作者: aaa31415    时间: 2016-11-4 11:09
谢谢 果然有效

作者: 苹果里的狼    时间: 2016-11-4 16:10
aaa31415 发表于 2016-11-4 11:09
谢谢 果然有效

你好,你这个是跟楼主说的图文不符啊!你这个明显是有序列号的嘛,已经不是试用版了好吧!???能分享一下么?
作者: aaa31415    时间: 2016-11-7 09:48
苹果里的狼 发表于 2016-11-4 16:10
你好,你这个是跟楼主说的图文不符啊!你这个明显是有序列号的嘛,已经不是试用版了好吧!???能分享一下 ...

我按照楼主的方法做的,然后打开su直接报错奔溃了,我重启了电脑以后又开了一下,发现变成这样了

作者: li1213    时间: 2016-11-7 12:47
skatter for sketchup安装时做到第四部打开时出现了黄色对话框是什么情况?请教
作者: songwate    时间: 2016-11-8 13:15
li1213 发表于 2016-11-7 12:47
skatter for sketchup安装时做到第四部打开时出现了黄色对话框是什么情况?请教 ...

更新ie浏览器安装个ie11的就好了

作者: 苹果里的狼    时间: 2016-11-8 13:54
aaa31415 发表于 2016-11-4 11:09
谢谢 果然有效

楼主教的是冷冻,你这个明显PJ,序列号还给遮住了哇哈哈。有偿无常你分享出来嘛,大神别装啦

作者: songwate    时间: 2016-11-10 16:50
可以使用但是生成不了植物,直接试用就能生成,不知道其他人是否也遇到这样
作者: arch杨涵宇    时间: 2016-11-11 09:06
问一下 skatter按照教程破解后 就是时间冻结后 用的时候不小心点到了deactivate(因为这单词不认识,想试试,吃了没文化的亏
作者: arch杨涵宇    时间: 2016-11-11 09:08
结果就gg了 然后重新申请15天的号还是没法用 重装skatter与更换su版本也没法用 都显示already triedskatter demo 感觉是这台电脑已经有用过的信息就用不了了  请问怎么能重新使用呢
作者: work2012    时间: 2016-11-14 17:09
找到这里了,累啊!谢谢楼主
作者: aaa31415    时间: 2016-11-15 16:28
锁时间还是突破不了15天的限制,看着试用时间还有好多天,结果不会出现红色的代理框
作者: 苹果里的狼    时间: 2016-11-18 16:19
songwate 发表于 2016-11-10 16:50
可以使用但是生成不了植物,直接试用就能生成,不知道其他人是否也遇到这样 ...

是的呢,握手,我也是这情况,能用,但是代理框不出现了。
作者: 艺术设计yj    时间: 2017-1-10 22:01
测试成功,楼主威武
作者: Saputra    时间: 2017-4-5 03:24
arch杨涵宇 发表于 2016-11-11 09:08
结果就gg了 然后重新申请15天的号还是没法用 重装skatter与更换su版本也没法用 都显示already triedskatter ...

use another email to get a new code :) easy.


作者: dadream    时间: 2017-4-9 18:11
2 much dear or i'll buy a copy,thank u for shearing this
作者: liu594211    时间: 2017-4-11 21:26
大神  神 神 神 神 神 神 神 神 神!这玩意儿太强了  

作者: 15960374013    时间: 2017-5-8 18:23
破解了时间,但是并没有用啊,可以显示操作界面,但是并不能生成散射啊
作者: jbwkz    时间: 2017-5-9 10:10
songwate 发表于 2016-11-10 16:50
可以使用但是生成不了植物,直接试用就能生成,不知道其他人是否也遇到这样 ...

我可以生产啊 不知道你什么情况  我在面不是组的情况下生成不了  但是我把面成组后  就生产了
作者: qq939672852    时间: 2017-6-10 01:48
锁时间还是突破不了15天的限制,看着试用时间还有好多天,结果不会出现红色的代理框
作者: hu123123    时间: 2017-6-21 19:32
aaa31415 发表于 2016-11-4 11:09
谢谢 果然有效

213131351

作者: 白兰    时间: 2017-7-4 10:43
Thanks for everything u do,it can run
作者: sky_811    时间: 2017-8-14 13:22
苹果里的狼 发表于 2016-11-4 10:10
你好,非常感谢你的回复,让我知道如何去做。
你提供的这个方法的确可以冷冻试用时间,但是,,,重启后,s ...

我的也失效了。刚刚会用 参数调不了
作者: 谷小哥    时间: 2017-9-25 16:45

测试成功,楼主威武
作者: askjfgiu    时间: 2017-11-15 15:48
休息休息休息休息学习学习谢谢
作者: HUNTER119    时间: 2017-11-22 12:37
厉害 啊  啊 啊
作者: ……勤    时间: 2017-12-1 12:42
ganxiefenxiang a ~
作者: caojinbo34    时间: 2018-2-3 15:14
想问问题主是什么版本的
作者: szhktk166    时间: 2018-4-20 14:02
感谢分享
作者: 840138614    时间: 2018-7-9 16:57
很不错。感谢。
作者: qaz81520    时间: 2018-7-17 09:53
怎么下载啦男啊
作者: 叵忒頭    时间: 2018-7-22 20:59
好复杂的感觉
作者: Saputra    时间: 2018-7-27 10:50
qaz81520 发表于 2018-7-17 09:53
怎么下载啦男啊

官網連結在這裏 https://getskatter.com/download/

作者: ζost`。    时间: 2018-10-15 22:49
刚刚试了,确实有用1.46版skatter,昨天安装的 今天 试用时间变成了16天
作者: yygao    时间: 2019-10-9 15:35
打卡,签到




欢迎光临 SketchUp吧 (https://www.sketchupbar.com/) Powered by Discuz! X3.4